Polycom KIRK Wireless Server 8000 & KIRK Wireless Server 2500 Configuration Guide
MSF Messages (Message Service Function)
69
Polycom, Inc.
2
In the
Receive
pane, select from the
Broadcast Type
drop-down list one of
the following options:
All handsets
(KIRK Wireless Server will use
broadcast method),
One handset
(KIRK Wireless Server will use CISS
method) or
A group of handsets
(KIRK Wireless Server will use broadcast
method).
3
In the
Repetitions
field, specify the number of times you wish the
broadcast to be resent.
4
(Only if the selected broadcast type is One handset) In the
PP Receiver Id
(Direct number),
specify the number where you wish to send the message.
5
(Only if the selected broadcast type is All handsets) In the
Area Receiver
Identifier
field, specify to which group of RFP the message should be
broadcasted.
6
In the
Hardware & Action
pane, select the sensor type from the
Hardware
Element
drop-down list.
7
From the
Action
drop-down list, select the desired action.
8
In the
Pre Alarm Time
and
Sensitivity
fields, specify the sensor
configuration values.
9
Click
Extension Hardware Request
button to send the current settings. If
Extension Hardware Request is busy, click
Release CISS Connection
to
release the connection.
10
Select the
Monitor
check box to receive a status on both the sent and
received messages or deselect the Monitor check box if you wish to receive
status only on the sent messages.
11
Click
Clear
to clean the Monitor window (optional).
Call Control
To configure a call from KIRK Wireless Server 8000 or KIRK Wireless Server 2500
1
On the menu window of the WEB page, click the
Apps. Demo
tab and
then click
Call Control
tab.
Note
For detailed information please consult Polycom documentation.
