Polycom DMA 7000, Getting Started Manual

Page: 9 / 62

Polycom ® DMA ™ System Server Setup
Polycom, Inc. 5
2
When prompted, elect to run the Configuration Utility.
3
In the DMA USB Configuration Utility window, click Configure the
System Parameters .
4
On the Network page, if you’re installing a two-node cluster, click
Enable 2-node configuration .
5
Enter the network values from the First-Time Setup Worksheet and click
Next .
6
On the System Time page:
a
Select the correct System time zone for your location.
b
Leave Auto Adjust For Daylight Savings checked (deselecting this
may cause problems, especially with NTP servers).
c
Under NTP servers , enter the IP addresses (or domain names) for the
time servers from the First-Time Setup Worksheet .
We strongly recommend specifying at least one and preferably three
time servers. Use NTP stratum 3 quality time servers, if possible.
d
Click Next .
If autorun doesn’t work or is turned off, navigate to the USB memory stick using My
Computer, Windows Explorer, or another file manager. Then start the Configuration
Utility by double-clicking
dma7000-usb-config.exe
.