Polycom DMA 7000, Getting Started Manual

Page: 10 / 62

DMA Getting Started Guide
6 Polycom, Inc.
7
On the Security Configuration page, select the unsecured access
methods you want to enable and deselect the ones you want to disable.
Or select
High security to disable all those listed.
8
Click Done .
The utility confirms that the configuration file was created and returns
you to the initial menu.
9
Verify that the initial menu now states that The USB stick is set to apply
system parameters .
10
Close the program.
11
In your system tray, click Safely Remove Hardware and select Safely
Remove USB Mass Storage Device . When a message tells you it’s safe to
do so, disconnect the USB memory stick from the PC.
12
Make sure that both servers are off.
13
If you need to replace the system software on the server(s) with a
different version, turn on the first (or only) server (the one you want
configured as Node 1) and insert the system installation disk for that
version. Otherwise, continue with the next step.
The Polycom DMA system software is already installed on the server(s), so the
system installation disk isn’t needed to set up a new system. Using it overwrites the
same software already on the server and needlessly lengthens the setup process.
Put the disk away in a safe place in case it’s ever needed to restore the system.