Polycom DMA 7000, Getting Started Manual

Page: 6 / 62

DMA Getting Started Guide
2 Polycom, Inc.
Complete the First-Time Setup Worksheet
Before you begin system setup, fill out the My System Values column of this
worksheet.
First-Time Setup Worksheet
System Configuration
Information
My System Values Description
Node 1 system name Local host name of the first (or only) Polycom
DMA system server. Must be a valid host
name: the letters a - z (case-insensitive), digits
0 - 9, and internal hyphens are allowed.
Node 1 IP address Static, physical IP address (dotted quad) for
the first (or only) Polycom DMA system server.
Node 2 system name Local host name of the second Polycom DMA
system server. Not used for single-node
installation.
Node 2 IP address IP address for the second Polycom DMA
system server. Not used for single-node
installation.
Virtual system name Local host name of the virtual host. Required
even for single-node installation.
Virtual IP address IP address of the virtual host. Required even
for single-node installation.
System domain Fully qualified domain name for the system
(optional).
Subnet mask Network mask that defines the subnetwork of
the system.
Default gateway IP address of the gateway server used to route
network traffic outside the subnet.
Primary DNS server IP address of the primary Domain Name
System server (optional, but strongly
recommended; at least one DNS server is
required in order to import global groups from
an enterprise directory).
Secondary DNS server IP address of a second DNS server (optional).
Tertiary DNS server IP address of a third DNS server (optional).