Chapter 1-Hardware Description
Polycom, Inc.
1-9
—
Use the
Rack Spacer
(item no. 3) to predetermine its position on the rack post,
making sure that square studs of the spacer fit into the rack post’s square/rounded
mounting holes. Mark the spacer’s location on the rack post. Repeat this process for
the 3 remaining vertical posts ensuring that the system can be horizontally seated.
Figure 1-1
Front view of RMX Rail Runner Assembly
2
Position the
Rack Spacer
(item no. 3) onto the marked rack post together with left rack
rail runner (item no. 1 which is labeled LEFT) and fasten the flat head screws 3*10mm
(item no. 4) as shown in the following figure:
Figure 1-2
Detail of Front Rack Spacer Assembly (left rail runner is shown here) for all RMX
types
LEFT RAIL
RIGHT RAIL
RMX 2000 rack assembly view
without rail runner clip
RMX 2000 rack assembly view
with rail runner clip
