Polychem PHT1401, Operation Manual And Spare Parts List

Page: 6 / 24

DO NOT OPERATE THE TOOL WITHOUT STRAP, YOU COULD DAMAGE THE FEEDWHEEL
AND THE WELDING / CUTTING GROUP
Adjustment of welding - cutting time
The welding time can be adjusted with a screwdriver (pic.A). Depending on strap quality and
dimensions, turning the screw, as shown; turning clockwise will increase the time, turning counter
clockwise will decrease the time.
Adjusting strap tension
The maximum strap tension can be adjusted with a screwdriver by turning the screw on the
pneumatic motor as shown (pic.B). Turning clockwise will reduce the tension, turning counter
clockwise will increase tension. Do not exceed maximum tension.
5) OPERATING ELEMENTS AND ADJUSTMENTS
LEVER 2 – CUTTING / WELDING
LEVER 1 – TENSIONING
LEVER 3 – RELEASE FEEDWHEEL
TENSION
HANDLE
TENSION MOTOR
WELDING MOTOR