Polyaire Zonemaster Airtouch, User Manual, Page: 6 / 28

ZONEMASTER AIRTOUCH ZONE CONTROL SYSTEM - User Manual
4
3) Manual AC/Group control
3.1 AC Unit On/Off
If an AC unit is connected to AirTouch, it can be turned on/off on the home
screen of AirTouch. The ‘A/C’ button (Figure 1) shows the AC status. Touching
the button will switch the AC unit on or off.
If AC is not set up, the AC button will show , meaning the AC control is not
available.
NOTE: If is displayed instead of or , it means AC signal error
or the system is under safety mode which can be rectified by referring to
“supply Air Safety High & Low Limits” in the installation manual.
3.2
Group On/Off/Turbo
a) On the home screen, touch a group button (Figure 2) to change the on/off
group status and the dampers of the group will open or close accordingly.
b) The group status can be set to ‘TURBO’ active when the group is specified
as a turbo group (refer to 5.4) and the grey turbo indicator will turn blue to
indicate the TURBO function is active. Figure 3 shows the group status
sequence alternated by touching the group button.
c) Up to 6 group buttons are shown in one screen and touch < or > to bring up
previous or next page.
Figure 2
Figure 3