Polyaire Zonemaster Airtouch, User Manual, Page: 10 / 28

ZONEMASTER AIRTOUCH ZONE CONTROL SYSTEM - User Manual
8
4.3 AC Timer
AC timer function is useful for
automatically switching the AC unit on
or off at given time if AC is set up in
AirTouch. You can use OFF Timer and
On Timer in combination or separately.
a) Touch on ‘Program’
screen (Figure 4) to enter ‘AC Timer’
setup screen(Figure 11).
b) Touch the radio button to enable
or disable the relevant timer,
touching the hour, minute or AM/
PM field will bring up the plus and
minus buttons(Figure 12), touch
and button to change the
time of the corresponding timer.
The AC timer icon will be on the
status bar if the AC timer is set
(Figure 13).
After an edit field is highlighted,
touch that area again will quit from
the editable status and the and
will disappear.
c) Touch button to save the timer
and back to Program page.
NOTE: If AC is not set up, AC timer
will not be available. AC timer
function is different from the
program function, the enabled timer
will act once and will not repeat. If
you want the action repeated at the
same time, you may look at programs.
Figure 11.
Figure 12.
Figure 13.