NOTE
To connect your DECT adapter to a USB-C port, use it with the optional USB-C adapter.
4
Subscription is successful when you hear "pairing successful" and "base connected" and
the DECT USB adapter LED is solid green.
NOTE
If the USB adapter LED goes solid red after flashing red and green, the subscription
attempt has failed and should be repeated.
Subscribe D200 USB adapter again
1
Insert the DECT USB adapter into your laptop or computer and wait for the LED to light
up.
2
To put your headset in subscribe mode, press and hold the Volume up button for 4
seconds. Your headset LED lights up.
3
To put your DECT USB adapter into subscribe mode, double press the recessed
subscription button with a pen or paperclip until the USB adapter flashes red and blue.
NOTE
USB connection may vary but function is the same
4
Subscription is successful when you hear "pairing successful" and "base connected" and
the DECT USB adapter LED is solid blue.
NOTE
If the USB adapter LED goes solid red after flashing red and blue, the subscription
attempt has failed and should be repeated.
End subscription mode to stop the USB adapter from searching for a headset. Method
varies by adapter model.
• D400 adapter: Press the subscription button once.
• D200 adapter: Press the recessed subscription button once with a pen or paperclip.
Subscription mode ends and the USB adapter LED is solid red for 4 seconds and reverts to
its previous state.
The Savi system ships with the over-the-air headset subscription enabled. In a multi-shift
environment, you may want to disable this mode of subscription.
Manage settings in Poly Lens Desktop App.
End subscription mode
Disabling over-the-air
subscription
17
