Make a call
1
Tap an Audio button
on the display panel. You hear a dial tone.
Desk phone only: Press phone's Headset button or manually remove handset if you don't have
an HL10 lifter or EHS cable.
2
Dial from your softphone or desk phone.
End/take a call
To answer or end a call, tap the corresponding Audio button
or tap the headset call
button.
Desk phone only: If you don't have an HL10 lifter or EHS cable, press your phone's Headset
button or remove the handset when answering a call and hang up when ending a call.
TIP
Headset call control for the computer requires Plantronics software and softphone
compatibility. See "Download software".
Mute
During an active call, tap the Mute button to mute or unmute your headset.
Hold a call
To hold an active call, press the headset Call button for 2 seconds. Press the Call button to
resume a held call.
Switch between calls (flash)
To switch between calls, press the headset Call button for 2 seconds.
Mini conference call
Combine audio from your desk phone and computer into a mini conference call.
With one active call and one held call, simultaneously press the base computer and desk
phone audio buttons for 4 seconds until the LEDs are solid green.
NOTE
The audio LEDs are red when your conference call is muted.
Set up a conference call
You can conference up to 3 additional headsets to a call in progress.
Join Savi headsets automatically (same headset type only)
1
While on a call, place the guest headset into the primary user's charging cradle.
The base subscription LED flashes.
2
The primary user hears a triple tone in their headset indicating a conference request. To
accept the request, press the primary user's headset Call button within 10 seconds.
3
If the process fails or times out because the guest's Call button is not pressed within 10
seconds, the guest subscription is terminated and the guest hears an error tone.
Join Savi headsets manually
1
While on a call, press the primary user's base subscription button.
The base subscription LED flashes.
2
Hold the guest headset's Volume up until the headset LED turns on.
3
The primary user hears a triple tone indicating a conference request. To accept the
request, press the primary user's headset Call button within 10 seconds.
4
If the process fails or times out because the guest's Call button is not pressed within 10
seconds, the guest subscription is terminated and the guest hears an error tone.
NOTE
Headsets in a conference have independent mute controls. The base only indicates the
primary user's mute state.
14