Poly Rove DECT User Manual Download Page 8

Page: 8 / 37

Reference Number

Feature

Feature Description

Dialpad

Enables you to enter numbers,
letters, and special characters. You
can also use the dialpad keys to
select menu items that have index
numbers.

Poly Rove Status Indicators

Poly Rove DECT IP phones have LED indicators that indicate the status of the different phone
components.

Note:

You can program the LED indicators on the wireless handset if you want to change them from the

default settings.

The following tables show the LED indicators and the default system states for each of the DECT IP

phone components.

Poly Rove Wireless Handset Status Indicators

LED Indicator

Default Status

Green

Voice message

Yellow

Low battery

Red

Missed call

Flashing red and green

Software update

Poly Rove Base Station and Repeater Status Indicators

LED Indicator

Status

No indicator

Powered off

Solid green

Registered; good quality signal

Blinking green

Searching for nearby base stations

Solid red

Powered on, but has an error or no signal

Blinking red

Firmware update or factory reset in progress

Solid orange

Powered on, but has poor signal quality

Blinking orange

Searching for IP address

Getting Started with Poly Rove DECT IP Phones

Summary of Contents for Rove DECT






































Search results

Summary of Contents for Rove DECT

Reviews:

Related manuals for Rove DECT

Brands by name

Popular brands

Poly Rove DECT, User Manual

Search results

Summary of Contents for Rove DECT

Reviews:

Related manuals for Rove DECT

Brands by name

Popular brands