Setting Up the Poly Medialign Dual Display System
147
h
Keeping the cables routed toward the center of the frame, place the EagleEye Director II base
assembly on top of the left display. Secure it to the display using three M5 × 10mm screws.
i
Refer to the
Polycom EagleEye Director II Setup Sheet
to complete the EagleEye Director II
assembly.
6
Cable the Medialign 86D system.
a
Connect the HDCI cable to the codec.
b
Connect the 3.5mm to 2x RCA-F Y-adapter cable to the codec audio out.
c
Connect the camera audio cable RCA-M connectors to the Y-adapter, red to red and white to
white.
d
Connect the RCA cable for the left speaker to the camera audio cable white RCA-F.
e
Route the RCA cable for the right speaker across the frames and through the cable clips. Connect
it to the camera audio cable red RCA-F.
f
Connect a 2M HDMI cable to the left display HDMI 1 input and the codec primary HDMI output.
g
Connect the 4M HDMI cable to the right display HDMI 1 input. Route it across the frames, through
the cable clips, and connect it to the codec secondary HDMI output.
h
Place the speaker power adapter in the lower rail of the lower horizontal frame toward the right
side of the left frame assembly.
i
Connect a 1M C13-C14 cable to the speaker power adapter. Route it up behind the frame and
connect it to the PDU.
(3) M5 x 10mm SCREW
1601-12997-001
FRAME NOT SHOWN
