poly-planar GSMR30, Owner'S Manual

Page: 12 / 18

12
T R O U B L E S H O O T I N G
On your Bluetooth music device
– Turn on or enable Bluetooth feature
then open Bluetooth setting for pairing. Choose
“GSMR30” from the list of
available Bluetooth link.
Once connected, you can now start playing your favorite music from your
Bluetooth music device.
Operating Range is up to 30’ (will vary,
dependent on installation)
If available, Press
or button to select a song
PAUSE FUNCTION
Press BND button to pause play. Press BND button again to resume play.
IMPORTANT NOTE:
Some Bluetooth-enabled devices may take more than 45 seconds to initiate
after pairing or does not pair at all. If this happen, try to turn off the stereo
and the device and pair it again.
The head unit supports A2DP wireless streaming audio from a Bluetooth
music device to GSMR30.
ISSUE OPTIONS
Unit will not
turn on (no
power) CAUSE: Yellow/red wire not connected or incorrect voltage
ACTION: Check connections for proper voltage (11-16V
DC)
CAUSE: Black wire not connected
ACTION: Check connection to ground
CAUSE: Fuse blown
ACTION: Replace the fuse
Unit has
power (but no
sound) CAUSE: Speaker wire not connected
ACTION: Check connections at speakers
CAUSE: One or more speaker wires touching each other or
touching chassis ground
ACTION: Insulate all bare speaker wires from each other
and chassis ground
Unit blows
fuses CAUSE: Yellow/red wire touching chassis ground
ACTION: Check for pinched wire