POLTI VAPORELLA NEXT VN18.10, Instruction Manual

Page: 26 / 80

14. REPLACEMENT BOILER CAP
GASKET
If the gasket of the boiler cap is damaged,
replace it with the approved spare part, as
described below:
14.1 Unplug the appliance and let it cool down
for 2 hours at least, if it is hot.
14.2 Empty the water from the tank to
prevent leaking.
14.3 Place the appliance onto its side and
unscrew the boiler cap (12).
14.4 Remove the damaged washer.
14.5 Insert the new gasket and push it in
place.
14.6 Screw the boiler cap back on, making su-
re that it is screwed on correctly.
The spare gasket can be purchased from
authorized Polti Service centres (check on
www.polti.com for the updated list).
15. POLTI KALSTOP
Polti Kalstop is the limescale product for
appliances with boiler for ironing and steam
cleaning.
Regular use of Polti Kalstop, every time the
tank is filled with water:
- Extends the life of the appliance.
- Allows emission of a “drier” steam
- Prevents limescale build up.
- Protects the walls of the boiler.
- Contributes to saving energy.
Polti Kalstop is sold in packages of 20 phials
at household appliance stores, at Polti
authorized service centres and at
www.polti.com.
16. STORAGE
16.1 Turn off the appliance and disconnect
from the mains electricity.
16.2 Wait for the appliance to cool down
completely before storing it.
16.3 Empty the water tank.
16.4 Position the iron on top of the mat,
inserting it into the back section of the
appliance first (13) and then securing it with
the locking slider (14) located on the front
section of the appliance.
16.5 Place the tube into the hook on the side
of the unit (15).
Before storing Polti Vaporella Next, make su-
re that the iron is locked by setting the lever
on the slider to (see point 16.4).
WARNING: Steam.
Risk of scalding!
WARNING: Risk of scalding! When
accessing the boiler (removing the cap,
filling up, emptying), ensure that the
appliance is switched off at the power
switch and has been disconnected from the
mains for at least two hours.
E
N
G
L
IS
H
| 26 |