• Unplug from the mains electricity.
• Act on the steam request lever until steam
flow ceases.
• Wait ten minutes and remove the safety
cap, unscrewing it without force.
• Leave the appliance to cool for at least 10
minutes.
• Filling the boiler as indicated on chapter 1.
• Carefully screw the safety cap back on,
checking that it is completely closed.
12. GENERAL MAINTENANCE
To clean the outside of the appliance, only use
a damp cloth and tap water. All accessories
can be cleaned using running water, ensuring
they are completely dry before the next use.
After using the brushes, we recommend let-
ting the bristles cool down in their natural po-
sition, in order to avoid any deformation.
Do not use detergents of any type.
Regularly check the status of the coloured
washer located in the connector assembly. If
necessary, replace with the appropriate spare
part, as described below.
Carry out the same inspection on the connec-
tion seals of the handle of the flexible hose,
the extension hoses and the accessory adap-
ter.
Every 2 months, rinse the boiler with tap wa-
ter.
13. KALSTOP optional
Kalstop is thelimescale product for applian-
ces with boiler for ironing and steam cleaning.
Regular use of Kalstop, every time the tank is
filled with water:
- Extends the life of the appliance.
- Allows emission of a “drier” steam
- Prevents limescale build up.
- Protects the walls of the boiler.
- Contributes to saving energy.
14. TRANSPORT
One of the great advantages of this device is
that it can be carried anywhere, thanks to the
handle or the shoulder strap.
To carry with the strap, attached the carrying
strap to the two holes (13)-(14).
15. STORAGE
15.1 Turn off the appliance and disconnect
from the mains electricity.
15.2 Turn the pin located on the lower part of
the appliance and wind the power supply ca-
ble (15).
WARNING: If, during unscrewing, the cap
spins freely or if steam is escaping, immedia-
tely stop the operation, ensuring that the
boiler is switched off and the power cable is
unplugged from the mains. Wait for the ap-
pliance to cool (two hour) and unscrew the
cap before removal. TAKE CARE OF YOUR
FACE !!!
-
Remove the damaged washer.
-
Insert the new washer, attaching it on the
steam nozzle and pushing it into place.
-
Lubricate the gasket with silicone grease
or Vaseline, or alternatively with small
quantities of vegetable oils.
ATTENTION: especially when the appliance
has just been filled, during cleaning and con-
sequently when moving the appliance, a
small amount of water may leak out mixed
with the steam from the accessories.
E
NGLI
S
H
| 29 |
VT HANDY 15 - M0S11269 - 1P07:FEV 1000-950.qxd
31/07/2015
10.58
Pagina 29
