G
G
E
E
N
N
E
E
R
R
A
A
L
L
M
M
A
A
I
I
N
N
T
T
E
E
N
N
A
A
N
N
C
C
E
E
Always make sure the appliance is unplugged
before performing maintenance work of any
kind.
Cleaning the water filter cage of the "Eco-
Active-Filter"
We recommend you to clean it after each use.
• Unhook the lever (
5
) under the handle (
3
)
and lift the cover (
4
) (fig. 1).
• Remove the filter cage (
17
) by pulling it up-
wards (fig. 3)
• Empty the water container (
6
) tilting it to-
wards the groove (fig. 9).
• Rinse the group under running water (fig.15).
• Put the filter cage back in its correct position
in the container.
Cleaning or replacing the sponge filter
• Pull the tube (
17c
) from the filter cage until it
slips off.
• Divide the body of the cage (
17a
) from the fil-
ter cover (
16
).
• Remove the sponge filter (
17b
) from the
cage. If the filter is damaged, replace it.
• Rinse all the components under running wa-
ter.
• Allow the sponge filter to dry before replacing
in the machine.
• Reassemble the filter group. Make sure that
the filter tube is correctly fitted (fig.15).
• In case of replacement, only use Polti origi-
nal spare parts.
• We suggest to clean the filter every 3-5 drai-
nings of the container
Replacing the HEPA filter cartridge
• Unhook the lever (
5
) under the handle (
3
)
and lift the cover (
4
) (fig.1).
• Remove the HEPA filter from its location
(fig.16) and replace it with an original Polti
spare part.
Note:
the filter lasts about 100 hours (about
every 6 months) in normal domestic use. If the
suction power noticeably decreases, replace
the filter even before the 100 hours.
Replacing the air outlet filter
• Move both levers (
9
) at the same time to-
wards the grille (fig. 17). Once the blocks
have been removed, lift the grille (
8
) (fig. 17).
• Take out the air outlet filter (
10
) (fig. 18) and
replace it with a Polti original spare part.
• Lift the cover (
10a
) and put the new filter
back in its place as shown in fig. 19.
• Before switching on the appliance, replace
the grille inserting the tang in the relevant
lock and push until it clicks.
Note:
the filter lasts about 100 hours (about
every 6 months). If the filter is torn or visibly da-
maged, replace it even before the 100 hours. If
the filter is used in dusty environments, it is
suggested to increase the frequency of repla-
cement.
R
R
E
E
P
P
L
L
A
A
C
C
I
I
N
N
G
G
T
T
H
H
E
E
R
R
E
E
M
M
O
O
T
T
E
E
C
C
O
O
N
N
T
T
R
R
O
O
L
L
B
B
A
A
T
T
T
T
E
E
R
R
Y
Y
THE BATTERY IS NOT SUPPLIED WITH THE
PRODUCT.
The remote control handle uses a 12V battery
type MN21.
The life of the battery depends on the fre-
quency of use. If the indicator light (
23
) does
not light up when pushing the button (
21
) or
(
22
) of the remote control, replace the battery.
Take the remote control handle (
M
), press the
lever of the battery cover (
N
) pulling it towards
the control board of the remote control.
Remove the cover and replace the battery ta-
king care that the marks + and - match with the
indication. Put the cover back.
Note:
Respect the environment, dispose of the
battery in the appropriate bins for separately
collected fractions.
LECOLOGICO AS810
40
E
E
N
N
G
G
L
L
I
I
S
S
H
H
LECOLOGICO AS810 M0S08538 1O09 8 LINGUE:Layout 1
29/09/2008
11.07
Pagina 40
Summary of Contents for LECOLOGICO AS810
Page 1: ......
