POLTI LECOLOGICO AS 820 COMPACT Usage Instructions Download Page 5

• Do not use the product with toxic substances.
• Do not lay the hot appliance on surfaces sensi-

tive to heat.

• Do not leave the appliance exposed to wind or

rain.

• Do not place the appliance near a live element,

an electric stove or any other source of heat. 

• Do not expose the appliance to extreme tempe-

ratures.

• Never let children or people who are not familiar

with how the appliance works use it.

• Do not press the buttons hard or with a pointed

object such as a pen. 

• Always rest the appliance on a stable surface.
• In case of accidental fall of the appliance it is ne-

cessary to have it checked by an authorized Ser-
vice Centre as the internal safety features may
have been affected.

• In case of breakdown or malfunction switch off

the appliance and never attempt to disassemble
it, but refer to an authorized Polti Service Centre.

• To avoid prejudicing the safety of the appliance

when repairing or replacing accessories, use
only original spare parts.

• Do not wind the power cable around the ap-

pliance, especially when the appliance is still hot.

• Do not use the appliance to suck up acids or sol-

vents, as these might cause serious damage to
the appliance and above all do not suck up ex-
plosive dust or liquids, as these could cause ex-
plosions on coming into contact with the inside
components of the appliance.

• Do not suck up toxic substances.
• Do not suck up burning or incandescent objects

such as embers, ash or other material in which
combustion is taking place.

• Do not suck up detergents or other substances

which could generate foam inside the water con-
tainer, as this could cause malfunctioning.

• Do not vacuum up liquids.
• Water container can be filled with tap water.
• Do not suck up materials such as cement, chalk

etc. which solidify once they come in contact with
water thus damaging the appliance.

• During refilling with water, switch off and discon-

nect the appliance from the mains.

• It is necessary to keep the unit in horizontal posi-

tion during operation.

• Let the appliance cool down before cleaning it.
• Before storing the appliance make sure that it

has completely cooled down. 

We recommend you use original Polti pro-
ducts only, as products of other brands may
not be suitable for use in Polti products and
could cause damage.

This unit conforms with Directive
2004/108/EC (EMC) and Directive
2006/95/EC (low voltage).

Polti S.p.A. reserves the right to change equipment
or accessory specification without prior notice.

P

P

R

R

E

E

C

C

A

A

U

U

T

T

I

I

O

O

N

N

S

S

KEEP THESE INSTRUCTIONS 

• Read these instructions carefully before using

the appliance.

• Any use which does not comply with these in-

structions will invalidate the warranty.

• The wiring system to which the appliance is con-

nected must always comply with the laws in
force.

• Before connecting the appliance, make sure that

the mains voltage is the same as the voltage in-
dicated on the data label of the appliance and
that the power outlet is connected to earth. 

• Always turn off the appliance at the on/off switch

before unplugging it.

• If the appliance is left unused, always disconnect

it from the mains.  Never leave the appliance
unattended with the cable plugged into the
mains.

• Always make sure the appliance is unplugged

before performing maintenance work of any kind.

• Do not pull the power cable out of the socket, but

grasp the plug itself to avoid damage to the
socket.

• Do not allow the power cable to be twisted, cru-

shed, stretched, or come into contact with sharp
or hot surfaces. 

• Do not use the appliance if the power cable or

other important parts of the appliance are dama-
ged.

• Do not use electric extension leads that are not

authorized by the manufacturer, as they may
cause damage or fire.

• If it is necessary to replace the power supply ca-

ble, please refer to the nearest Polti authorised
service centre, since the use of a special tool is
necessary.

• Never touch the appliance with wet hands or feet

with the cable plugged into the mains.

• Do not use the appliance when barefoot.
• Do not use the appliance near washbasins, bath-

tubs, showers or containers full of water.

• Never immerse the appliance, the cable or the

plugs in water or another liquid.

• Use of the appliance in places where there is a

danger of explosions is prohibited.

E

E

N

N

G

G

L

L

I

I

S

S

H

H

27

LECOLOGICO AS 820

LECOLOGICO AS820 M0S09594 1Q11_MOD_4:VT 2300 M0S05357 1L05

22/12/2010

8.54

Pagina 27

Summary of Contents for LECOLOGICO AS 820 COMPACT










Reviews: