16
see the working frequency
1 From standby state, press [Menu] key to get into the setting mode and
will be showing.
2 Press [MENU] key within 1 second, the LCD will show receive and transmi
frequency and
will be disappear.
Repeat above operation 1 and 2 to exit the displays frequency mode.
scan
Scan the receiving signal, from scan state the transceiver will inspect every
defining frequency, when discover the signal will stop until the signal disap
-
pears. Transceiver will be set delay time by dealer or manufacturer. ( it is
resume time after scan and received ) settle in the frequency, during the
time if received the signal again, the transceiver will continue settle in the
frequency within the delay time until the signal disappears, then transceiver
will return back to scan state.
1 From standby state , press [MENU] to get into the setting mode and
will be showing.
