POLMAR DB-50M, User Manual

Page: 82 / 93

Programming Software Installing and
Starting (in Windows XP system)
Double click the icon of the DB-50M.exe file, then follow the
installing instruction.
◊ Install USB Cable Driver Programme
1. Click start menu in computer, under “ALL PROGRAMS” menu,
choose and click “USB To Com port” in the DB-50M software,
install “USB To Com port” driver by indication.
2. Connect the optional PC50 USB Programming cable to USB
port in PC with transceiver (As pic 1).
3. Double click DB-50M software shortcut or click DB-50M software
in procedure index of start menu, choose serial com port as
indicated then click OK to start programming software (As pic 2).
4. According to instruction,select correct ”COM Port” (As pic 3),
then click “OK” to start programming software.
NOTE: Even in same computer,the selective COM Port is different
when USB cable connects with different USB port.
You shall install software before connecting the USB cable line.
Switch on transceiver before writing frequency. You had better
not switch on or off the power supply of transceiver when it is
connected with computer, otherwise, it will make transceiver
unable to read or write frequency. In this case, you have to turn
off programming software, pull out USB cable. Then reinsert USB
cable and open software, then re-choose COM Port, it will turn
into normal operation. Therefore, please connect transceiver
with computer after switching on the transceiver. Don’t restart
transceiver power when it is connected with computer.
This software has product identify system, when firstly installing
the software, you have to connect the transceiver,otherwise you
can not start the software.
NOTE
37
V/ M
HM
SCN
LOW
LOW
V/ M
HM
SCN
SET
TV/S OL
Pic 1
Pic 2
Pic 3