n
All unintended uses are prohibited.
n
This manual must be handed over to the operator after initialisa-
tion.
“"Further information can be requested from the manufacturer"”
2.2.1 Vacuum and pressure side flow losses
NOTICE!
The flow behaviour of a fan can be negatively influenced
by unfavourable installation conditions. The operating
point of the fan can move to an unauthorised working
range (splitting range). In this case, there is no claim to
a guarantee for consequential damages, especially due
to (resonance) vibrations.
2.3 Operator's responsibility
The operator is the person who operates the machine for commercial
or business purposes by himself, or who hands the machine over to
third parties for use/application and who bears legal product respon-
sibility during operation for the protection of users, personnel or third
parties.
The machine is deployed in commercial areas. The operator of the
machine is therefore subject to the legal obligations and notification
obligations on work safety.
Alongside the safety information in this manual, the valid safety,
accident prevention and environmental protection regulations must
be complied with for the machine's area of use.
The following particularly applies:
n
The operator must inform himself about the valid work protection
and determine additional dangers in a danger analysis caused
by special working conditions where the machine is used. These
must be implemented for operation of the machine in the form of
operating instructions.
n
The operator must check whether the operating instructions he
has produced for the machine correspond with the current status
of rules throughout the operating period and adapt them if neces-
sary.
n
The operator must ensure that all employees who work with the
machine have read and understood this manual. Furthermore,
he must train employees at regular intervals and inform about the
dangers.
Operator
Operator's duties
Safety
19.12.2012
10
Summary of Contents for CRJM
