7
4. Assembly of saddle post with a saddle
A saddle is delivered assembled to the stem (8). Place the stem (8) in the saddle tube (9), adjust
the saddle height by inserting the stem (8) to the proper depth and tighten the saddle post
clamp (10) with the allen key of 6mm, by using torque value of 16-18 Nm.
5. Assembly of pedals
The pedals are delivered separated from the rest of bicycle. Adjust the left pedal to the left crank
arm (11) and right pedal to the right crank arm (12), place it in a pedal socket (13) and tighten it
with the flat wrench of 15 mm, by using torque value of 6-9 Nm. The left and right pedals are not
marked, therefore in order to identify e.g. the left pedal, try to adjust first one of them and then
the other pedal to the left crank arm. The pedal matches the particular crank arm, if it can be
screwed into it.
6. Lights – Polka City
Front light
Read light
To installed lights should be equipped with AAA batteries. In the case of the headlamp, release
the locking clip (1) located under the light, install the battery, and push back the cover of light in
place. In the case of the tail light, loosen the screw (1), remove the lights cover, install the
batteries, reinstall the light cover and and tighten the screw.
After the completion of assembly, the bicycle is to be equipped according to the bicycle equipment
required by the legal regulations applicable on the territory of the Republic of Poland.
3.
Legal regulations
Pursuant to the legal regulations applicable on the territory of the Republic of Poland, in order to ride a
bicycle on the public roads, it has to be equipped with:
a.
at the front – at least one white or selective yellow front position light.
b.
at the back – at least one red reflex reflector of a shape other than triangle and at least one red
position light.
c.
at least one properly functioning brake.
d.
a bell or other warning signal with a non-shrill sound.
