4
In order to assemble a bicycle, the followings activities should be performed one after the other.
1. Assembly of front wheel (for Polka for Everybody, for Ladies, Pista)
A front wheel is delivered separated from the rest of bicycle. Place the front wheel between the
fork arms (1), place the hub axle (2) in the front fork dropouts (3) and tighten the hub screws (2)
with the flat wrench of 15 mm, by using torque value of 24-28 Nm.
Assembly of front wheel with fender and front basket (Polka City)
If you ordered Polka City in the Duke variant, you have received the front basket along with your
bicycle Below you will find assembly instructions.
A front wheel is delivered separated from the rest of bicycle. Place the front wheel between the
fork arms (1), place the hub axle (2) in the front fork dropouts (3) and tighten the hub screws (2)
with the flat wrench of 15 mm, by using torque value of 24-28 Nm.
Place the front wheel in the front fork dropouts (3) and set the bike in a stable position, e.g.
resting on the kickstand.
Remove completely nuts on the front axle hub by the dropouts of the front fork (3).
Install the two arms supporting the basket to the front brackets of the front basket:
• Insert the bolts through the small holes in the arms and fastening holders of the basket (1). Screw head
should be on the outside and the thread and nut on the wheel-side,
• Screw the nut on the bolt on the wheel-side and lock it with wrench 8,
