PA450UM
10
System Menu
1.
Press and hold
the
MENU
button for more than 3 seconds to enter the system
menu.
“SYSTEM MENU” will appear on the display, followed by the first menu
item, “Key Beep.”
2. Rotate the
Encoder Knob
to navigate the system menu and highlight the
desired item.
3. Press the
Encoder Knob
to select the item and rotate the
Encoder Knob
to
adjust the selected menu item.
4. Press the
Encoder Knob
again to enter your selection and return to the
menu list.
5. Press the
swoop arrow
soft
button to return to the previous operation.
6. The following items can be adjusted:
•
Key Beep (On/ Off)
•
LCD Backlight (1
– 10)
•
LCD Contrast (1
– 10)
•
Button Backlight (1
– 10)
•
Power Button Backlight (1
– 10)
•
Tuning Region (USA/ Europe)
•
SXM Satellite Radio (Sub Menu, only accessible in SiriusXM mode)
-
Set Lock Code
-
Locked Channels
-
SXi Software Version
•
Bluetooth Setup (Sub Menu, only accessible in Bluetooth mode)
-
BT ON/OFF: Choose “BT ON” or “BT OFF”.
-
BT PAIR (ON/OFF): Choose “YES” to automatically pair a previously
paired device
-
BT DEVICE (Lock/Unlock, Disconnect/Connect, Delete): View, lock
and delete from a list of previously paired mobile devices.
•
Battery Alarm (On/Off)
•
Battery Auto Off (On/Off)
•
Reset to Defaults: Press
Encoder Knob
once to confirm. (Resets unit to
factory default settings)
NOTE: BT Pair and BT Device menu options are only available while in the
BT mode.
Battery Alarm Operation
If Battery Alarm is set to
“ON”, an alarm will sound (3 beeps every 30 sec) when
the voltage drops to 10.8V (+/- 0.3V). A visual warning (Battery Low) will appear
flashing on the LCD display.
NOTE: “OFF” is the default setting for Battery Alarm. If the audio is muted or
the volume is set to 0, the audible beep will not be heard.
Auxiliary Input
To access an auxiliary device:
1. Connect the portable audio player to the AUX IN cables routed from the rear
of the radio.
2. Press the
MODE
button twice to view the AUX option.
3. Press the
AUX
soft button
to select auxiliary audio input mode.
Liquid Crystal Display (LCD)
The current frequency and activated functions are shown on the LCD panel (10).
NOTE: LCD panels may take longer to respond when subjected to cold
temperatures for an extended period of time. In addition, the visibility of the
numbers on the LCD may decrease slightly. The LCD display will return to
normal when the temperature increases to a normal range.
Back Key (swoop arrow)
In various modes and conditions, the swoop arrow option will be available in the
lower right soft button. Press button to exit the current operation without waiting for
the system default time out and returning to the previous menu display.
