PA450UM
16
Setting the User Passcode
1.
Press and hold the
MENU
button for more than 3 seconds to enter the
system menu.
2.
Rotate the
Encoder Knob
to navigate the menu list to the "SXM SETUP
MENU" option.
3.
Press the
Encoder Knob
button to view "Set Lock Code".
4.
Press the
Encoder Knob
button to select Set Lock Code. “Enter Lock Code:
0 _ _ _
” prompt message will appear.
5.
Rotate the
Encoder Knob
to select a digit (0
– 9) for each number position.
The default code is "0000". Press the
Encoder Knob
button to confirm
each digit and move to the next digit.
6.
Upon entering the last digit, the unit will prompt for confirmation of the code.
7.
Repeat the same steps to enter the code again.
Locking a Channel
1.
Press and hold the
MENU
button for more than 3 seconds to enter the
system menu.
2.
Rotate the
Encoder Knob
to navigate the menu list to the "SXM SETUP
MENU" option.
3.
Rotate the
Encoder Knob
to "
Locked Channels…".
4.
Press the
Encoder Knob
button to select. “Enter Lock Code: 0 _ _ _”
prompt message will appear.
5.
Enter the Lock Code, a list of channels with open lock icons will appear.
6.
Rotate the
Encoder Knob
to select a channel you wish to lock
7.
Press the
Encoder Knob
button to lock the channel. The locked icon will
indicate the channel has been successfully locked.
Accessing a Locked Channel
1.
Tune to the desired channel using the
|<<
or
>>|
soft buttons or use the
direct access tuning method.
2.
An
“Enter Lock Code: 0 _ _ _” prompt message will appear.
3.
Enter the Lock Code within 10 seconds to unlock and tune the channel.
4.
The device will remain in
“unrestricted” (unlocked) mode until the next power
cycle.
Reset SiriusXM Channel Lock Code
If you forget your Parental Control lock code, use the following directions to reset
the code to the default
“0000”. Resetting the lock code will not affect the locked
channels list.
1.
In SiriusXM mode, tune to Channel 0.
2.
Rotate the
Encoder Knob
to change the volume setting to 0.
3.
Press the
Power Button
to turn off the unit.
4.
With the unit turned off, press and hold the
Power Button
until the system
version information is displayed on the screen.
5.
Press the
Encoder Knob
button to turn the LCD display off.
6.
Press the
Power Button
to turn on the unit.
7.
The lock code has now been
reset to “0000”.
INFO
Alternate Display Information
INFO
option is available in
TUNE, CAT
and
PSET LIST
modes
.
Press
INFO soft
button to change the display information in the following order:
NAME
(Artist)
>
SONG
(Title) >
INFO
(Content,
if available
) >
CAT
(Category) >
NAME
(Artist).
Satellite Signal Strength
The display will indicate satellite reception strength as shown below.
Signal Strength
Strength Display
No Signal
Weak
Good
Excellent
