POLITEC s.r.l. | Manual Gapid WS – Ver. 1.0
7
5
DECRIPTION OF COMPONENTS
1.
TERMINAL BLOCK:
Free output NC contact of tamper and alarm, with possibility of balancing in terminal block.
2.
TEST DIP:
SET ON to activate LED and BUZZER signals.
During normal working mode this DIP
MUST
be set
OFF
.
3.
SIGNALING LED:
RED LED
when test mode is activated, it turns on together with BUZZER when sensor goes to
alarm.
BLUE LED
Anytime an operation mode is set by function selector, this led will blink to indicate
a new program selection.
6.
FUNCTION SELECTOR:
6.1.
STANDARD INSTALLATION
1
Light Metallic Grid
2
Rigid Grid\Thick
3
Garden Netting Not Welded
4
Welded Garden Netting
5
Wall\Railings – Anti Break down
6
Windows
6.2.
SELF-LEARNING
7
Self-learning For Alarm
8
Self-learning For Disqualification
9
Self-learning For Spontaneous Vibration
6.3.
RESET
0
Reset
