_______________________________________________________________________________________________________________________________________________________
© 2002 – 2007 Polimaster Inc. and its licensors. All rights reserved
www.polimaster.us
3
2 BEFORE YOU BEGIN
Thank you for purchasing a Polimaster Personal Combined Radiation Detector/ Dosimeter
РМ
1703
МО
-
1. Before operating this unit, please review this guide thoroughly and retain it for future reference.
The Personal Combined Radiation Detector/Dosimeter is designed to detect, search, and locate gamma-
emitting radioactive sources. The detector is easily handled requiring only understanding of the basic
parameters and settings for proper operation.
The device is intended for everyday or emergency use by firefighters, military, police, etc. It is designed
for use in any area where radiation dose and dose rate are required to be measured, where exceeding the
default dose and dose rate values requires an alarm. In addition, the device provides accumulated
information about the accumulated dose and system analysis of the gathered dosimetric information.
3 PRECAUTIONS
1.
Keep the instrument at least 4 inches from radio emitting sources, such as cell phones, to avoid
false positives.
2.
Avoid severe mechanical shocks and submerging the device into water.
4 GENERAL DESCRIPTION
The
РМ
1703
МО
-1 belongs to Polimaster’s new generation of highly sensitive, small and power-saving
personal gamma combined radiation detectors/dosimeters. When ON the detector continuously monitors
the environment for radiation and alerts the user with a visual, audio and/or vibrating alarm if a radiation
source is detected or a radiation threshold is exceeded.
All operations history is stored in the device’s permanent memory, protecting the data even when the
battery is removed. The stored data can also be transferred from the
РМ
1703
МО
-1 to a personal
computer via its infrared interface.
The instrument is recommended for detecting and locating radiation sources in both indoor and outdoor
environments.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation
4.1 Display and Control Buttons
The instrument is equipped with two control buttons located on its top panel:
•
MODE
button — (switching on the instrument; switching between operation modes; background
level calibration; changing the device parameters in setup mode)
•
LIGHT
button — (switching on the backlight; enabling IR communications with a PC; changing the
parameters in setup mode.)
Summary of Contents for PM1703MO-1
Page 2: ......
