Polestar CD-SMF, User Manual

Page: 110 / 216

P a g e | 110
Hold and Resume Conference
During the conference, users could tap on More softkey then tap on Hold to hold the conference at any
time. To resume the call tap on Unhold.
Auto Conference Mode
The CD-SMF also supports "Auto Conference" which allows users to establish conference call in a quick
and easy way, instead of adding the other parties one by one. To enable Auto Conference feature, go to
web GUI
→
Phone Settings
→
Call Settings
→
Call Features and set " Auto Conference " to "Yes".
To esablish call with auto conference when there are 1 or more calls on the CD-SMF, simply tap on "More"
softkey and select "Conf". All the calls on CD-SMF will be brought into the conference.
Multicast paging
Multicast paging is an approach to let different SIP users to listen to a page from a common multicast IP
address. In multicast page call, one way audio will setup from sender to listeners, but the listeners cannot
talk to each other. The sender and listeners must be located within the same LAN.
Sender multicast page configurations are under Web UI Settings
→
Applications
→
Programmable Key
→
BLF
→
Press on Add
1. Set the key Mode to Multicast Paging in dropdown list.
2. Enter the multicast paging description in Display Name field.
3. Enter multicast paging address and port in URL field. The range of multicast page address is 224.0.0.0
to 239.255.255.255 with a port not in use by phone.
To receive multicast page, the CD-SMF must be well configured to listen to the right address and port. The
configurations are under Phone Settings->Multicast Paging
→
Multicast Listening. There are 10 listening
address supported. After multicast page listening well configured, please reboot the phone to let the settings take
effect.
Multicast Listening switch
Users can enable/Disable multicast listening feature from Multicast listening widget. When Multicast
Listening Widget is set to ON; The phone will be listening to Multicast paging calls.