PS-3185SH
Installation Guide
P. 23
Events Logging
With this feature, the Remote Car Starter will play back the last 4 Start Failure Events Codes and
the last Intrusion Code via the Parking Lights or L.E.D.
Events playback
Ensure that the Hood is up, that the vehicle is not in Valet Mode and that the Ignition is
OFF
.
•
Hold down the Hood Pin-switch for 4 seconds.
•
Release the Pin-switch.
The Parking Lights will come on.
•
While the Parking Lights are on, immediately push the Pin-switch 3 more times
(
down-up / down-up / down-up
).
The Parking Lights and L.E.D. will flash the five events stored in memory.
Table 12: Events playback
The first four playback codes are
Start Failure Events
. There is a pause after each event code is
played back. The system will play back the most recent event first, then the second one, and so on.
If there is no event at all to report, the Parking Lights will give one long flash.
Start Failure Codes through the Parking Lights
1 x = No Start
3 x = Hardware Reset
4 x = Brakes
5 x = No Tach Cut-off
6 x = Hood
7 x = Engine Running, no Ignition detected, or Tach before Start
Note
: “
x
” stands for one flash of the Parking Lights
