10
Basic operation
Overview
Connect to the mains
Insert the mains wire plug of the unit into AC 120V mains outlet.
Power on/off
When you press the POWER switch button to standby or turn on TV.
Note:
The power indicator will turn into red when TV is under standby state.
The power indicator will die when TV is under turn on state.
Non-signal power-off in 5 minutes
In case the unit under blue screen or non-signal screen saver state, TV will be standby
state automatically 5 minutes later, to turn it on, please press POWER button on TV.
Change channels
You can change channels by using the CH / button in front of the TV(or the CH
/ button on the remote control).
Volume UP/DOWN
You can adjust the sound by using VOL / button in front of the TV (or the VOL /
button on the remote control).
Sleep function
1. Press down SLEEP button on the remote control to display the preset time
120 minutes, 90 minutes,60 minutes,30 ,minutes, the unit will be automatically
turned off when the set time has elapsed.
2. To cancel the time-off function, press the SLEEP button consecutively until
display changes to SLEEP OFF state.
Picture modes
Press P.STD button on the remote control to select picture modes (MEMORY—-
STANDARD—DYNAMIC—MILD), MEMORY status is the picture mode you have
adjusted.
Summary of Contents for TTM-2410
Page 1: ...24 Pure Flat Tube Stereo TV TTM 2410 20060630 ...
Page 21: ......