manualshive.com logo in svg

Polaroid PLR-P3001-N, User Manual

Share
Download
Polaroid PLR-P3001-N User Manual Download Page 17

Installation 

 

 

   

9 

 
Removing the Tapes of the Toner Cartridge 

 

Important! 

When you unpack the machine, a toner cartridge has been packed 

separately besides the machine.    Please remove the package cushion 
and tapes on the toner cartridge before using it. 

 

 

 

Installing the Toner Cartridge 

 

Please follow these steps to install the toner cartridge

：

 

1.

 

Remove the plastic bag, protective cover, and tape of the new toner cartridgeg. 

             

             

 

 

2.

 

Tilt the toner cartridge up and down and then right and left 10 times to distribute 

the toner evenly inside the toner cartridge.

 

 

 

 

WARNING! 

 

Be careful not to inhale toner. 

 

To avoid print quality problems, DO NOT touch the toner rollers. 

 

If toner gets on your clothing or other fabric, wipe off the toner with 
a dry cloth. Wash the items in cold water and dry them in the 
shade. 

 

To prevent the toner cartridge from damage, do not expose it more 
than several minutes. 

 

 

Summary of Contents for PLR-P3001-N






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands