- 21 -
System Setup
You can change the default settings to customize performance to your own
preference.
Remove the disc from the disc tray and press the ‘SETUP’ button on the remote
control, the settings menu will appear. It includes General Setup, Speaker Setup,
Dolby Digital Setup, Video Setup and Preference setup.
Press the
(direction buttons) on the remote control to select a category.
All the items in the category will appear on the TV screen. Press the ‘ENTER’
button to confirm your selection.
Category
When you enter a category all the items under this category will appear, and the
items placed in the middle (or highlighted) will be the current set up.
Press the
(right direction button) on the remote control to select the correct
category.
Press the direction buttons to select your preference. The item you select will be
highlighted.
Press the ‘ENTER’ button for confirmation.
Press the
(left direction button) to enter the other setup menu.
General Setup
TV Display
Select Normal/PS or Normal/LB when a 4:3 TV is connected.
In Normal/LB mode, the displayed images are marked with bars above and below
the picture. In Normal/PS mode, the displayed images will be cut off.
Select Wide when a 16:9 wide screen TV is connected.
Angle Mark
If the scene was shot from multiple angles, then you can easily change the
camera angle of the scene you are watching.
ON/OFF
With this switched on you will be notified if alternative viewing angles are
available.
OSD Lang
There are several different OSD languages (subtitiles) for selection. You can
select it according to your preference.
