15.
Power source
The product should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home, consult your appliance dealer or
local power company. For products intended to operate from battery power, or other sources, refer
to the operating instructions.
16.
Power lines
An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
17.
Overloading
Do not overload wall outlets and extension cords as this can result in a risk or fire or electric
shock.
18.
Object and liquid entry
Never push objects of any kind into the product through as they may touch dangerous voltage
points or short out parts that could result in fire or electric shock. Never spill or spray any type of
liquid on the product.
19.
Outdoor antenna grounding
If an outside antenna is connected to the product, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built up static charges, section 810 of the National Electrical
Code, ANSI/NFPA 70,provides information with respect to proper
grounding of the mast and supporting structure, grounding of lead-in
wire to an antenna discharge product, size of grounding conductors,
location of antenna discharge product, connection to grounding
electrodes and requirements for the grounding electrodes.
20.
Service
Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified servicing personnel.
21.
Replacement parts
When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire or electric shock or other hazards.
22.
Safety check
Upon completion of any service or repairs to this product ask the service technician to perform
safety checks to determine that the product is in proper operating condition.
23.
Wall or ceiling mounting
The product should be mounted to a wall or ceiling only as recommend by the manufacturer.
24.
Damage requiring service
Unplug the product from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
A: when the power-supply cord or plug is damaged.
B: if liquid has been spilled or objects have fallen into the product.
