M402b MiniPortrait Camera Repair Manual
Disassembly/Assembly
9
2. Disassembly/Assembly
This section of the Repair Manual describes the camera's disassembly procedures.
CAUTION
Care should be taken throughout all disassembly and reassembly procedures
never to smudge or soil the lenses.
Required Tools and Equipment
•
Lens cleaning tissue
•
Dust and static free wiping cloth
•
Cotton gloves or finger cots
•
Standard tool kit
•
Solder sucker
•
Tweezers
•
Hot glue gun and glue
Front Cover Assembly
(Figure 2-1)
Removal
1. Remove the four (4) lens caps from the front cover lenses.
2. Pull out the aperture knob from the aperture drive gear.
3. Using a pair of tweezers, peel off the upper decal cover and lower decal cover.
4. Using a Phillips head screw driver, remove the six (6) screws that secure the front cover
and the shutter plate assembly to the camera body.
CAUTION
When installing the front cover make sure:
• the four (4) fine thread screws are used to secure the top of the front
cover and the shutter plate assembly to the camera body.
• the two (2) coarse thread screws are used to secure the bottom of the
front cover and the shutter plate assembly to the camera body.
