M402b MiniPortrait Camera Repair Manual
Disassembly/Assembly
15
Camera Back Interface Plate
(Figure 2-4)
Removal
1. Remove the camera back (Figure 2-3).
2. Using a Phillips head screw driver, remove the twelve (12) flat head screws that secure
the camera back interface plate to the camera body.
3. Lift off the camera back interface plate from the camera body.
Figure 2-4. Removing camera back interface plate
Installation
1. Position the camera back interface plate onto the camera body.
2. Using a Phillips head screw driver, install and tighten the twelve (12) flat head screws that
secure the camera back interface plate to the camera body.
3. Install the camera back (Figure 2-3).
Camera
Back
Camera
Body
Camera Back
Latch
Camera Back
Interface Plate
