3
Installing the Battery:
1. Open the battery compartment.
2. Insert the battery as shown above.
3. Close the battery compartment and lock it.
Charging the Battery:
1. Power Off the camera.
2. Connect the camera using the USB cable to the
computer's USB port or to the AC Charger (which
is then connected to a standard wall socket).
3. Charge light will turn off when the battery is fully
charged.
4. When charging using the AC Charger we
recommend to charge up to 2 hours. It will take
longer to charge when using your computer.
NOTE : YOUR CAMERA IS ALREADY
PREINSTALLED WITH 4GB MICRO SD CARD.
Installing Micro SD Memory Card:
1. Open the Micro SD Card slot cover flap.
2. Insert the Micro SD Card as shown above.
3. This camera can support up to 32GB Micro
SD Card.
IMPORTANT
:
We highly recommend that you format the
Micro SD card the first time before using.
You must use a Class 10 Micro SD Card or
higher only.
Attaching the Lens:
1.
Attach the lens to the camera - Aligning the red dots of the camera and the lens (1 and 4).
2.
Hold the base of the camera securely and turn the lens clockwise about 45 degrees till it snaps in place.
Removing the Lens:
Important : Turn off the camera to standby mode by clicking on the "ON/OFF" button once.
Your camera screen will be off at this mode. Now you can safely remove the lens.
Holding the Lens Release button (3), turn the lens anticlockwise direction about 45 degrees and pull out the lens.
1. Red Dot (Camera)
2. Lens Connector Pin
3. Lens Release Button
4. Red Dot (lens)
5. Lens Connector Base
