ENGLISH
15
Chapter 2 Installing the LCD TV
The cable ground shall be connected to the grounding system of the building accurately, or as
close to the point of cable entry as possible. Use of this TV for other than private viewing of
programs broadcasted on UHF, VHF or transmitted by cable companies for the use of the
general public may require authorization from the broadcast/cable company, and/or program
owner.
A
IN
B
O U T
Cable TV Line
2 set signal
splitter
(not included)
RF switch
(not included)
Cable TV converter/
descrambler
(not included)
Cable TV (CATV) Connection
■
The RF switch (not included) is required to provide two inputs (A and B). Setting
the RF switch to position A allows viewing of all unscrambled channels by using
the TV channel keys.
■
Setting the RF switch to position B allows viewing of all scrambled channels via
the converter/descrambler by using the converter channel keys.
■
A 75-ohm coaxial cable connector is built into the set for easy hookup.
When connecting the 75-ohm coaxial cable to the set, connect the 75-
ohm cable into the ANT. terminal.
■
Some cable TV companies off er premium pay channels. Since the
signals of these premium pay channels are scrambled, a cable TV
converter/descrambler is generally provided to the subscriber by the
cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels.
(Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown,
consult your cable TV company.)
For more specifi c instructions on installing cable TV, consult your cable TV company.
One possible method of connecting the coverter/descrambler provided by your cable TV
company is shown in the diagram below.
VHF/UHF IN
Summary of Contents for FLU-1911S
Page 1: ...19 48cm HD Ready LCD TV FLU 1911S 20060803 ...
Page 28: ......