15
Remote Control
Preparation of Remote Control
Insert the batteries while observing the
correct (+) and (-) polarities.
1.
Refer to the drawing; take out the
empty battery receptacle.
2.
A separating film was applied to
the battery for shipment. Remove
this film.
3.
Insert the battery into the
receptacle and insert it into the
remote.
4.
Under normal usage the battery
will last for six months.
5.
Take out battery when the remote
is not in use for a long time.
Using of Remote control
Point the remote control unit from no
more than about 5m from the remote
control sensor and within about 60
degrees of the front of the unit.
The operating distance may vary
depending to the surrounding
brightness.
Notes:
Do not point bright lights directly at
the remote control sensor.
Do not place objects between the
remote control unit and the remote
control sensor.
Do not use this remote control unit
while simultaneously operating the
remote control unit of any other
equipment.
This drawing
is wrong!
