6. Loosen the lateral hexagon screws using the hexagon key
provided. Adjust the angle of the projector as desired and
then retighten the screws.
7. Connect the transformer to a power outlet. The projector is
switched on and starts rotating.
The product has no power switch and is always on as long as
it is connected to the power supply. Disconnect the power
supply in order to switch the LED projector off.
Cleaning and care
• Disconnect the transformer from the mains socket and let the
LED projector cool down sufficiently before cleaning.
• Do not use any abrasive or chemical cleaners. To clean, use a
clean, dry, lint-free cloth. For stubborn dirt, slightly dampen the
cloth with water.
• Allow the product to dry completely before continued use.
Disposal
Electronic devices are recyclable waste and must not
be disposed of in the household waste. At the end of its
service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute
to the protection of the environment.
