Polarlite 1493203 Operating Instructions Manual Download Page 4

• The LEDs get hot during use. Keep the product away from 

easily flammable materials when in use.

• The product generates heat during use. Do not cover the 

product during use.

• The product is suitable for both indoor and outdoor use.
• Attention, LED light: Do not look directly into the LED light! Do 

not look into the beam directly or with optical instruments! 

• The mains outlet must be located near to the device and be 

easily accessible.

• Only the included transformer may be used as a power supply.
• The transformer may be supplied with power only via a properly 

installed power outlet connected to the public supply mains. 
Before plugging in the transformer, verify that the transformer's 
nominal voltage complies with the voltage of your power supply 
company.

• Never plug in or unplug the transformer with wet hands.
• Do not unplug the transformer by tugging on the cord, grasp 

and pull the power plug using the provided gripping surface.

• When setting up the product, make sure that the cables are not 

pinched, kinked or damaged by sharp edges.

• Always lay the cables so that nobody can trip over or become 

entangled in them. This poses a risk of injury.

• Unplug the transformer in case of a thunder storm for safety 

reasons.

• Do not over-tighten the screws. Over-tightening the screws may 

cause damage to the threading and can impair the strength of 
screw connections.

Summary of Contents for 1493203









Reviews: