Operation
Do not install or operate the product under water.
Make sure the cable hangs loosely and is not overly
tensioned. Failure to heed this warning may cause the
cables to tear.
Do not connect the product to the power supply while it
is still in the packaging. Uncoil the power cable fully.
Do not hang any objects from the product and do not
cover the product.
When inserting the ground spike into the soil, do not
use any tools (e.g. hammers), as such would damage the
product.
Check all screw connections from time to time. Screw
connections may loosen over time due to adjusting and
moving the product.
The LEDs are neither dimmable nor replaceable.
1. Uncoil the power cable fully.
2. Loosen the screw by turning it anticlockwise, and remove the
spring washer and flat washer from the ground spike using
the spanner provided (see ).
3. Attach the lamp to the ground spike using the screw, spring
washer and flat washer (see ).
4. Connect the plug of the power cable to the socket on the
transformer. It is only possible to connect in one way. Secure
the connection by turning the plug’s screw cap onto the
transformer’s thread (see ).
5. Choose a suitable location to set up the device with soft
ground. Stony ground will damage the ground spike.
Carefully insert the LED projector including the ground spike
all the way into the soil (see ).
