Polaris Trail Touring Deluxe Owner'S Manual Download Page 87

Page: 87 / 153

MAINTENANCE

Lubrication

Chaincase Oil

Check the chaincase oil level at the intervals outlined in the mainte-

nance charts beginning on page 76. Change the chaincase oil after the

first 500 miles (800 km), then every 1000 miles (1600 km) or season-

ally.

Maintain the oil level between the “safe” marks on the dipstick. Clean

the magnetic plug on the dipstick whenever checking or changing oil.

Polaris recommends the use of Polaris Synthetic Chaincase Lube. See

page 128 for the part numbers of Polaris products.

Oil Check

1. Position the vehicle on

a level surface.

2. Remove the dipstick (1)

and view the oil level

on the dipstick.

3. Add the recommended

oil as needed.

Do not

overfill

4. Clean the magnetic

plug (2).

5. Reinstall the dipstick.

Summary of Contents for Trail Touring Deluxe


























































































































































Search results

Summary of Contents for Trail Touring Deluxe

Reviews:

Related manuals for Trail Touring Deluxe

Brands by name

Popular brands

Polaris Trail Touring Deluxe, Owner'S Manual

Search results

Summary of Contents for Trail Touring Deluxe

Reviews:

Related manuals for Trail Touring Deluxe

Brands by name

Popular brands