Polaris Trail Touring Deluxe Owner'S Manual Download Page 86

Page: 86 / 153

MAINTENANCE

Lubrication

Gearcase Oil Level (WideTrak)

Check the gearcase oil level at

the intervals outlined in the

maintenance charts beginning

on page 76. Change the gear-

case oil after the first 500 miles

(800 km), then every 1000 miles

(1600 km) or seasonally.

To check the oil level, place the

machine on a level surface. The

oil level should be between the

“safe” marks on the dipstick (1).

See your Polaris dealer for the

recommended oil for your

machine.

Do not overfill

NOTE:

Clean the magnetic

plug (2) every 500

miles (800 km) and

whenever checking or

changing lubricant.

CAUTION

Mixing brands or using non-recommended lubricants could result in exces-

sive wear to chain, sprockets and bearings. Always use Polaris-recom-

mended products for your vehicle.

Summary of Contents for Trail Touring Deluxe


























































































































































Search results

Summary of Contents for Trail Touring Deluxe

Reviews:

Related manuals for Trail Touring Deluxe

Brands by name

Popular brands

Polaris Trail Touring Deluxe, Owner'S Manual

Search results

Summary of Contents for Trail Touring Deluxe

Reviews:

Related manuals for Trail Touring Deluxe

Brands by name

Popular brands