Polaris SUNNY THERM, Instruction Manual

Page: 28 / 34

26
(7-1) general safety
Polaris Co. makes use of high-quality raw materials for advanced
production processes to promote the safety level. In addition to
this, the device is tested repeatedly before shipment and is provid-
ed for the customer after the confirmation of the quality control unit.
Before using the machine, be sure about the accuracy
of all parts installation. The device should not be used
in case of defects.
Following these instructions will increase the lifetime of the device:
• In case of power fluctuations or weak electricity, use an auto
matic 2.5 KW transformer.
• It is recommended to use an independent 2 by 2 cable to
supply the furnace.
• Avoid turning on/off the furnace frequently and in short spans
of time.
• If the furnace doesn’t turn on for any reason, wait for at least
1 minute, then press the Power button again.
• Read the operating instructions of the device before using
the device.
• Technicians and those who are not trained to use this device
are not authorized to use it and Polaris Co. won’t be held
liable for the wrong operation of the device ant resulting con-
sequences.
• the consumer should waer suitable fireproofing gloves while
using the device.
Don’t clean the device with cleaning solutions while it is ON.
Remove the rear cord when cleaning the device. Use common
cleaning solutions. Never keep the panel surface wet for more
than 1minute.
Device Application