background image

40

SAFETY

Operator Safety

POTENTIAL HAZARD

Operating this ATV with improper tires, or with improper or
uneven tire pressure.

WHAT CAN HAPPEN

Use of improper tires on this ATV, or operation of this ATV
with improper or uneven tire pressure, may cause loss of
control, and increases the risk of an accident.

HOW TO AVOID THE HAZARD

Always use the correct size, type, and pressure as specified
on page19.

POTENTIAL HAZARD

Operating this ATV with improper modifications.

WHAT CAN HAPPEN

Improper installation of accessories or modification of this
vehicle may cause changes in handling which in some
situations could lead to an accident.

HOW TO AVOID THE HAZARD

Never modify this ATV through improper installation or use of
accessories.  All parts and accessories added to this vehicle
should be genuine Polaris Industries Inc. or equivalent
components designed for use on this ATV; and should be
installed and used according to instructions. If you have
questions, consult an authorized Polaris ATV dealer.

WARNING

WARNING

Summary of Contents for Sprotsman 700





















































































































































Reviews: