background image

10

SAFETY

Key Safety Issues

Protect Your Sport

Know all local, state/province riding laws;
Respect your vehicle;
Respect the environment; and
You will gain the respect of others.
We also advise you to strictly follow the recommended maintenance
program as outlined.  This preventive maintenance program is designed
to ensure that all critical components on this ATV are thoroughly
inspected at various intervals.
All information in this manual is based upon the latest product data and
specifications available at the time of printing.  Polaris Industries Inc.
reserves the right to make product changes and improvements which
may affect illustrations or explanations.
No part of this manual shall be reproduced or used without the written
permission of Polaris Industries Inc.

Illustrations included in this manual are general representations of
parts having a similar function.  Your model may differ.
AN ATV IS NOT A TOY AND CAN BE HAZARDOUS TO
OPERATE.

  An ATV handles differently from other vehicles

including motorcycles and cars.  A collision or rollover can occur
quickly, even during routine maneuvers such as turning and driving on
hills or over obstacles, if you fail to take proper precautions.

Summary of Contents for Sprotsman 700





















































































































































Reviews: