Polaris Sprotsman 700 Safety And Maintenance Manual Download Page 23

Page: 23 / 148

SAFETY

Safety Decals and Locations

ALL WHEEL

DRIVE

SWITCH

Do not push switch to
engage AWD if the rear
wheels are spinning.
This may cause severe
drive shaft and clutch
damage.
See your Owner’s
Manual.

7079780

7079604

AWD Models

7078261

TRAILER MAX WEIGHT:
1225 LBS. (556 KG) ON LEVEL GROUND
850 LBS. (368 KG) UP TO 15

GRADE

HITCH MAX. VERTICAL WEIGHT: 35 LBS. (16KG)

WARNING

Pushing reverse
override button
may cause
sudden in-
creases in pow-
er and traction if
too much
throttle is ap-
plied. Loss of
control or for-
ward flipover
may result, es-
pecially in
AWD. See Own-
er’s Manual.

DO NOT TOW FROM RACK OR BUMPER.
Vehicle damage or tipover may result causing severe
injury or death. Tow only from tow hooks or hitch.

Maximum Rack Loads: Front 90 lbs. Rear 180 Lbs

7170021

WARNING

MANUFACTURED
BY: POLARIS IND INC.

DATE:

VIN:

THIS VEHICLE IS AN ALL TERRAIN VEHICLE AND IS NOT
INTENDED FOR USE ON PUBLIC ROADS.

PRINTED IN U.S.A.

7078472

CE VÉHICULE EST UN VÉHICULE TOUT TERRAIN
QUI NEST PAS DESTINE A ETRE UTILISE SUR LES
CHEMINS PUBLICS.

Summary of Contents for Sprotsman 700





















































































































































Search results

Summary of Contents for Sprotsman 700

Reviews:

Related manuals for Sprotsman 700

Brands by name

Popular brands

Polaris Sprotsman 700, Safety And Maintenance Manual

Search results

Summary of Contents for Sprotsman 700

Reviews:

Related manuals for Sprotsman 700

Brands by name

Popular brands