Polaris Sportsman XP 1000 S 2020, Owner'S Manual For Maintenance And Safety

Page: 108 / 154

HEADLIGHT BEAM ADJUSTMENT
The headlight beam can be adjusted
horizontally and vertically.
Tighten or loosen one or more of the
three headlight adjustment screws
q
to adjust the beam upward or
downward or to the left or right.
HEADLAMP REPLACEMENT
If a headlight becomes damaged or inoperable, the entire headlight assembly
must be replaced. An authorized dealer can assist.
TAILLIGHT/BRAKELIGHT LAMP REPLACEMENT
The taillight assembly is not serviceable. If the light fails to operate properly,
replace the entire taillight assembly.
SPARK PLUGS
SPARK PLUG RECOMMENDATIONS
Refer to the specifications section for the recommended spark plug type and
gap for your vehicle. Torque spark plugs to specification.
NOTICE
Using non-recommended spark plugs can result in serious engine damage.
Always use POLARIS-recommended spark plugs or their equivalent.
PLUG CONDITION TORQUE SPECIFICATION
New Spark Plug 18-20 ft-lbs
(24-27 Nm)
Previously Installed Spark Plug 18-20 ft-lbs
(24-27 Nm)
SPARK PLUG INSPECTION
Spark plug condition is indicative of engine operation. Check the spark plug
firing end condition after the engine has been warmed up and the vehicle has
been driven at higher speeds. Immediately check the spark plug for correct
color.
106
MAINTENANCE
Downloaded from ManualsNet.com search engine