Polaris SPORTSMAN ACE Owner'S Manual Download

Page: 42 / 153

FEATURES AND CONTROLS

Instrument Cluster

Rider Information Center

Use the MODE button to toggle through the
information area options.

Display Units (Standard/Metric)

The display can be changed to show either
standard or metric units of measurement for
each of the following settings.

Tip:

To exit the set-up mode, turn the key off. Wait 5 seconds, then turn the key
on. The gauge display the mode that was displayed prior to setting the
units.

1. Turn the key to the OFF position.

2. Press and

hold

the MODE button while turning the key to the ON

position.

3. When the display flashes the distance setting, tap the MODE button

to advance to the desired setting.

4. Press and

hold

the MODE button to save the setting and advance to

the next display option.

5. Repeat the procedure to change remaining display settings.

Standard Display

Metric Display

Distance

Miles

Kilometers

Fuel

U.S. Gallons

Liters, Imperial Gallons

Temperature

Fahrenheit

Celsius

Time

12-Hour Clock

24-Hour Clock

MODE

Button

Summary of Contents for SPORTSMAN ACE


























































































































































Search results

Summary of Contents for SPORTSMAN ACE

Reviews:

Related manuals for SPORTSMAN ACE

Brands by name

Popular brands

Polaris SPORTSMAN ACE, Owner'S Manual

Search results

Summary of Contents for SPORTSMAN ACE

Reviews:

Related manuals for SPORTSMAN ACE

Brands by name

Popular brands