Polaris Sportsman 9921483 Owner'S Manual Download

Page: 28 / 207

Pre-Ride Check

We're almost ready to have an adult start your ATV. But before the ATV is started for the first

time, you must do a Pre-Ride Check. In fact, every time you want to ride you must have an

adult help you check some things on your ATV before starting it. Let's learn about these

things now.

Make sure the throttle doesn't stick. Check this by pushing the throttle lever toward the

handlebar and then letting go. The lever should come right back to where it was before

you pushed it. If it comes back slowly or stays close to the handlebar, the ATV has a

sticky throttle. This means that something is wrong or broken and must be fixed before

you can ride your ATV safely.

Never start the engine if you have a sticky throttle. You could be seriously hurt if you ride with

a sticky throttle. Have an adult or your Polaris dealer fix the throttle before you ride.

Summary of Contents for Sportsman 9921483
















































































































































































































Search results

Summary of Contents for Sportsman 9921483

Reviews:

Related manuals for Sportsman 9921483

Brands by name

Popular brands

Polaris Sportsman 9921483, Owner'S Manual

Search results

Summary of Contents for Sportsman 9921483

Reviews:

Related manuals for Sportsman 9921483

Brands by name

Popular brands