Polaris Sportsman 9921483 Owner'S Manual Download

Page: 174 / 207

171

Maintenance

Cleaning

Washing the ATV

If a high pressure water system is used for cleaning (not recommended), exercise extreme

caution. The water may damage components and could remove paint and decals. Avoid

directing the water stream at the following items:
• Wheel bearings
• Radiator
• Transmission seals

• Brakes
• Cab and body panels
• Labels and decals

NOTE:

If warning and safety labels are damaged, contact your Polaris dealer for free replacement.

Grease all zerk fittings immediately after washing. Allow the engine to run for a while to

evaporate any water that may have entered the engine or exhaust system.

Summary of Contents for Sportsman 9921483
















































































































































































































Search results

Summary of Contents for Sportsman 9921483

Reviews:

Related manuals for Sportsman 9921483

Brands by name

Popular brands

Polaris Sportsman 9921483, Owner'S Manual

Search results

Summary of Contents for Sportsman 9921483

Reviews:

Related manuals for Sportsman 9921483

Brands by name

Popular brands